The genuine Paslode 7.4V lithium-ion battery for Impulse Li-Ion cordless nailers. Paslode rates it at 2150 mAh, with a one-hour recharge on the Li-Ion charger.
The Paslode B20543A is the 7.4V lithium-ion battery for Paslode Impulse Li-Ion cordless nailers. Paslode lists it for all of its Li-Ion tools and rates it at 2150 mAh, with a one-hour recharge. It’s the spare framers keep in the ute so a flat battery doesn’t hold up the frame.
Paslode’s data sheet for the Impulse FrameMaster-Li PowerVent framing nailer rates this battery at up to 9,000 nails per charge, alongside up to 1,200 nails per fuel cell. Real numbers depend on the tool, the timber and how you work, so treat that as a ceiling rather than a promise.
The same data sheet says to store fuel cells and batteries below 49 degrees C. A closed ute in a Melbourne January can get hotter than that, so keep spares in the shade.
| Brand | Paslode |
|---|---|
| Part number | B20543A |
| Battery type | Lithium-ion |
| Voltage | 7.4V DC |
| Capacity | 2150 mAh |
| Recharge time | About 1 hour |
| Charger | Paslode Impulse Li-Ion Charger Kit, B20543B |
| Wall adaptor | B20543C |
| Storage | Below 49 degrees C |
Paslode lists the B20543A for all its Li-Ion tools. Ni-Cad tools take the oval Paslode B20544E 6V battery, and the IM200S stapler uses the round B20542. Check the tool or the battery you’re replacing before you order. If in doubt, call the yard with your nailer model and the part number on your old battery.
Paslode lists the Impulse Li-Ion Charger Kit (B20543B) and the Impulse Wall Adaptor Li-Ion (B20543C) for the same tools, so if a charger or its adaptor goes missing on site, you can quote the right code when you replace it.
Charge it on the Paslode Li-Ion charger kit listed for these tools. Switch the battery to its off position when you put the nailer away, keep the contacts clean and dry, and store it below 49 degrees C. A battery that’s dropped hard or damaged shouldn’t go back on the charger. When it reaches the end of its life, take it to a battery recycling drop-off point instead of the household bin.
This is a quote item. Call the yard on (03) 9435 2555 or send a request through our quote request page, and we’ll confirm stock and pricing. Collect from 58 Watsonia Road, Watsonia, or add it to a timber order delivered on our own trucks across Melbourne, 6 days a week. Questions? Contact the yard.
On the tools this week? Pick up 75 mm bright D-head framing nails with fuel cells, F17 structural framing, or browse our power tools range. Paslode’s Impulse batteries and chargers page lists every battery and charger code.
It suits Paslode Impulse Li-Ion tools. Ni-Cad tools need the B20544E.
About an hour for a full charge, according to Paslode’s data sheet.
The Paslode Impulse Li-Ion Charger Kit, part number B20543B.
Yes. It’s Paslode part number B20543A.
